TF Card Expansion Payment Terminal Board with Face Recognition, WF-SPT-07, AndroidSBC, Mumbai

TL;DR: TF Card Expansion Payment Terminal Board with Face Recognition

AndroidSBC supply-chain sourcing update on the smart payment terminal board family serving Mumbai, India. The WF-SPT-07 smart payment terminal Android motherboard covers the legacy Android 11 payment terminal build and eleven sister configurations in the WF-SPT series, spanning the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, 5.5-inch 720x1280 LVDS capacitive touch panel, and Android 11 with AOSP baseline firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Mumbai and India importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

The smart payment terminal Android motherboard family from AndroidSBC is specified for the way India acquiring actually works - contactless first, QR close behind, receipt on paper, firmware signed, estate managed remotely. Mumbai buyers get that as a standard baseline rather than as a paid engineering change. AndroidSBC holds a fixed bill of materials per production lot, which is the part Mumbai buyers care about most: the board that passed qualification is the board that arrives in volume, twelve months later, on the same peripheral contract.

WF-SPT-07 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-07 (legacy Android 11 payment terminal build) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For India importers sourcing the WF-SPT family, the WF-SPT-07-A variant is the typical configuration for the replacement board for an installed terminal estate use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for India Buyers

Most Mumbai programmes are multi-format from the start: one countertop build for staffed lanes, one unattended build for kiosks, one outdoor build for forecourts. Buying those from three suppliers means three Android baselines and three sets of spare parts.

Key handling is the fifth problem. Payment hardware shipped into India has to show how keys are injected, how the secure element is provisioned and how a tamper event is logged, and that documentation belongs in the Mumbai delivery file. AndroidSBC answers those problems with the WF-SPT family: twelve configurations, one fixed bill of materials per production lot, the compliance set bundled with the first carton, and a 6th production slot released this month for Mumbai on the Mumbai - Shanghai lane.

Competitive Comparison: WF-SPT-07 vs Competing Smart Payment Terminal Motherboards

The Mumbai question is repeatability. Competing boards change panel vendors, printer drivers and modem modules between lots; the WF-SPT family holds them, which is what makes aan India estate serviceable.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Mumbai buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the India integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Mumbai is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

Demand in India is moving toward unattended and self-service formats, and that shift changes what an legacy Android 11 payment terminal build has to prove: an offline transaction buffer, a watchdog that recovers without a human, and a printer that survives a roll of receipts per day in Mumbai.

• Countertop tier: WF-SPT-12 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

For Mumbai buyers the reading is straightforward: the growth is in formats, not in replacements, so the board that wins is the one that can be qualified once and then repeated across aan India estate.

Partner Success Story: Anatolia Hospitality Tech (hotel front desk integrator)

The Turkish hospitality programme run by Anatolia Hospitality Tech started as a sample order and turned into an estate standard once the qualification data came back from Mumbai. Anatolia Hospitality Tech rolled out 43000 WF-SPT boards across 64 hotels.

• OEM relationship: AndroidSBC private-label SKU shipped with Anatolia Hospitality Tech branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BIS / WPC conformity, all bundled into the Shenzhen source-factory shipment.

Anatolia Hospitality Tech IT Director for Turkish Hospitality signed the acceptance note with this comment: "Anatolia Hospitality Tech runs the hospitality configuration at the front desk and the restaurant on one board, and 43000 units were accepted across the Mumbai hotel group."

Field Report: estate replacement programme for an installed terminal base

NANSHAN, September 30, 2026 - Gong Li, AndroidSBC field desk. The legacy Android 11 payment terminal build on the WF-SPT-07 board was validated at the top and the bottom of the temperature window, and the India acceptance report records both numbers instead of a single ambient figure. The WF-SPT-07 payment terminal board order for Mumbai, India cleared the burn-in station on schedule and is en route via the Mumbai - Shanghai lane.

The WF-SPT-07 legacy Android 11 payment terminal build production lot includes the WF-SPT-07-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For India integrators, the BIS CRS registration with WPC ETA for wireless modules paperwork is bundled.

Filed by Gong Li, AndroidSBC field desk, NANSHAN. Indian rollouts run enormous QR volume, and the scan engine and the QR path are tested before the card path.

WF-SPT-07 Application Scenarios

The WF-SPT-07 legacy Android 11 payment terminal build sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-07-A configuration is the typical build for the replacement board for an installed terminal estate use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-02 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-03 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Mumbai Buyers

Mumbai buyers usually land on one of three tracks with AndroidSBC, and the difference between them is how much of the integration the partner wants to own.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

Every track ends the same way in India: the board arrives with its test report, its certificate set and its signed firmware image, whether or not it carries the partner brand in Mumbai.

Frequently Asked Questions

Does the smart payment terminal board family support a legacy 11 payment terminal build?

Answer: Yes. The legacy 11 payment terminal build is a stock configuration on the smart payment terminal board family from AndroidSBC. All twelve configurations are validated against the same Android build and the same peripheral contract before shipment to India.

Which configurations are available in the WF-SPT family for India buyers?

Answer: The family spans RK3288 plus eleven configurations covering countertop, unattended, outdoor, hospitality and multimedia formats, all documented in one delivery file for Mumbai.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. The board is specified for concurrent panel, printer and scan operation, with the peripheral contract documented so a Mumbai integrator can swap mechanisms without a board change.

What payment scheme certification support does AndroidSBC provide for India?

Answer: AndroidSBC ships the CE / FCC / RoHS set plus BIS / WPC conformity with every lot, and supports BIS CRS registration with WPC ETA for wireless modules testing for the India configuration through the qualification run at the factory.

What is the minimum order quantity and the sample lead time for India?

Answer: Sample orders start at a single configuration and ship in 1-3 days from Shenzhen. Volume pricing begins at 500 boards, and the Mumbai lot is quoted against a published price list.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Custom ROM, boot logo and pre-install work is scoped as an engineering item and delivered with the board, so the India integrator receives a terminal that boots into its own application.

How are firmware updates delivered to aan India device estate after deployment?

Answer: Staged OTA groups are created during qualification, so the Mumbai estate is never updated in a single wave, and every image carries a signature the terminal verifies before it applies.

What shipping terms does AndroidSBC support for India orders?

Answer: Standard terms are FOB Shenzhen and CIF Port of Mumbai, with DAP available for Mumbai programmes where the partner wants a single invoice through to delivery.

Contact AndroidSBC: Start Your WF-SPT-07 Sourcing Conversation

Partners in Mumbai can start with a single sample configuration or with a full estate specification - both routes end at the same production slot and the same compliance file.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

AndroidSBC is the export arm of Wanlin Manufacturing Group and is recruiting India distributors, integrators and brand partners for the smart payment terminal board family. Sample dispatch for Mumbai runs in 1-3 days.